Cyclone Box Reloaded - GSM-Support
Cyclone Box Reloaded - GSM-Support
Cyclone Box Reloaded - GSM-Support
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>GSM</strong>-<strong>Support</strong> ul. Bitschana 2/38, 31-420 Kraków<br />
mobile +48 608107455, NIP PL9451852164 REGON: 120203925<br />
www.gsm-support.pl<br />
<strong>Cyclone</strong> <strong>Box</strong> <strong>Reloaded</strong><br />
<strong>Cyclone</strong> <strong>Box</strong> <strong>Reloaded</strong> jest nowym boxem serwisowym do telefonów Nokia. Unikalna budowa pozwala na pełną diagnostykę<br />
telefonu poprzez dodatkowe gniazdo oraz w pełni konfigurowalny pinout lini Tx2/VPP. <strong>Box</strong> umożliwia flashowanie,<br />
odblokowywanie i naprawy telefonów Nokia BB5, SL3, DCT-L, DCT4, DCT4+ - aktualnie jako jedyny obsluguje unlock dla<br />
nowych DCT4+ (New secuirty) jak np. RH-116 7070p v6.82 itp. Teraz nie potrzenujesz już kredytów, ani nawet adaptera TX2<br />
- wersja reloaded nie wymaga go do pracy. <strong>Box</strong> w wersji <strong>Reloaded</strong> jest lżejszy, szybszy, tańszy (wyeliminowana została karta<br />
smart-card). Mimo to pod względem funkcjonalności cyclone reloaded nie rózni się od wersji classic (Nokia, iPhone,<br />
Backberry).<br />
Wersja <strong>Reloaded</strong> nie wymaga do pracy żadnych aktywacji ani kredytów (obecnie kredyty wykorzystywane są jedynie do<br />
unlocka XPERIA oraz SL3) WSZYSTKIE INNE OPERACJE SA BEZPLATNE!<br />
Zalety <strong>Cyclone</strong> <strong>Reloaded</strong> <strong>Box</strong>:<br />
<strong>Cyclone</strong> w wersji <strong>Reloaded</strong> to też bardzo prosta instalacja, aktualizacja, rejestracja- wszystko za pomoca jednego<br />
przycisku i box gotowy do pracy!<br />
Wygodny interaktywny pasek postepu w Windows 7. W przypadku zminimalizowania okna informacja o aktualnym<br />
statusie pracy: zielony kolor - pracuje, czerowny kolor- blad, zolty kolor- pauza.<br />
Unikalne hardware, zaprojektowane w roku 2008, dzisiaj po serii poprawek jest jednym z najstabilniejszych,<br />
najbardziej dopracowanych oraz najszybszych urządzeń do serwisowania Nokii.<br />
Nie potrzebuje całkowicie dostępu do internetu (jedyna funkcja wymagająca połączenia z serwerem to Rejestracja<br />
oraz Aktywacja urządzenia, oraz periodyczne przedłużenie życia karty zabezpieczającej (co 2-3 miesiące).<br />
Jako jedyne urządzenie na rynku potrafi odczytać dane LBF dla SL3 całkowicie za darmo oraz bez dostępu do<br />
Internetu.<br />
Kompatybilny z USB 1.0, 1.1, 2.0 i 3.0<br />
System operacyjny: All NT based Windows OS (włacznie x86 i x64 - sterowniki dostosowane do pracy z64bit) -<br />
kompatybilny zWindows NT, Windows Xp, Windows Vista, Windows 7<br />
pinout kompatybiliny z kablami UFS/JAF itp.<br />
bardzo niskie obciążenie portu USB, w bezczynności tylko 55mA<br />
obsługuje zarówno tryby FBUS jak i USB<br />
Opis modułu LG Tool (DODANY W MAJU 2012):<br />
Uruchamiając moduł "server tools" mamy możliwość generowania kodów odblkowujących (SIM unlock,<br />
Network unlock, etc). do każdego modelu LG na podstawie nr-u IMEI. Limit 5 telefonów dziennie!<br />
Opis modułu Blackberry Tool:<br />
Generacja kodu MEP2 do odblokowania blokady SIMLock<br />
Generacja kodu MEP4<br />
Generacja kodów MEP1,MEP3,MEP5
Aktualnie kalkulator Blackberr jest całkowicie Standalone - nie potrzebny dostęp do Internetu<br />
Obsługiwane wszystkie MEPy<br />
Opis modułu Iphone Tool:<br />
Darmowy Przykładowy odczyt odczyt: Informacji o sieci, statusie blokady, okresie gwarancji<br />
IMEI: 013043007194959<br />
model: iPhone 4S 16GB Black<br />
version: 5.1<br />
serial: DNRH1SWSDTC0<br />
mac: FC:25:3F:6B:C4:16<br />
warranty coverage: Limited Warranty<br />
warranty period: 2012-01-31 / 2013-01-30<br />
purchase country: France<br />
activated: yes<br />
carrier: Orange France<br />
SIM locked: yes<br />
Opis modułu Nokia Tool - część wspólna:<br />
Odczyt pamięci Permanent Memory<br />
Zapis pamięci Permanent Memory<br />
Odczyt Product Profile<br />
Zapis Product Profile<br />
Selftesty<br />
Naprawa Bluetooth<br />
Naprawa/analiza Dynamic Camera Configuration (Camera on standby)<br />
Reset telefonu do ustawień fabrycznych<br />
Zapis/odczyt danych produkcyjnych: kod produktu, PSN, HWID<br />
Opis modułu Nokia Tool - część DCT4/DCT4+/Infineon XGold:<br />
Naprawa usterek programowych poprzez flashowanie<br />
Aktualizacja oprogramowania<br />
Zmiana pakietów językowych<br />
Naprawa IMEI (poprzez kalkulację ASK->RPL)<br />
Odczyt IMEI z UEMa<br />
Odblokowanie / założenie blokady SIMLOCK - modele oparte o DCT4 RSA: 1110i, 1112b, 1200, 1202, 1208, 1208b,<br />
1209, 1600b, 1661, 1662, 1650, 1680 Classic, 1680 Classic-2b, 2220 Slide, 2310, 2320 Classic, 2320 Classic-2b,<br />
2323 CLassic, 2330 Classic, 2600, 2600a, 2610, 2610b, 2626, 2630, 2630b, 2660, 2660b, 2680 Slide, 2720 Fold,<br />
2760, 2760b, 2760h, 5000, 5030 XM, 6030b, 7070 Prism, 7100 Supernova,...<br />
Odblokowanie blokady Simlock z telefonów opartych o platformę Infineon XGOLD 1xx poprzez LBF - Nokia 1616,<br />
1800, C1-01, 1280, 1202, ...<br />
Możliwość odczytu zaszyfrowanego kodu zabezpieczającego z telefonów opartych o DCT4+ oraz XGold całkowicie bez<br />
utraty danych użytkownika - jako pierwsze i jedyne urządzenie na świecie.<br />
Backup obszaru IMEI dla telefonów XGOLD - jako pierwsze i jedyne urządzenie na świecie<br />
Restore obszaru IMEI dla telefonów XGOLD - jako pierwsze i jedyne urządzenie na świecie<br />
Backup pełnego RPL (IMEI, SIMLOCK) dla telefonów XGOLD - jako pierwsze i jedyne urządzenie na świecie<br />
Reset licznika błędnie wprowadzonych kodów dla modeli XGOLD - jako pierwsze i jedyne urządzenie na świecie<br />
Binarny dump pamięci PMM z telefonów XGold<br />
Format obszaru użytkownika w telefonach WD2<br />
Odczyt kodu zabezpieczającego<br />
Reset kodu zabezpieczającego bez utraty danych<br />
Reset licznika błędnie wprowadzonych kodów<br />
Kopia zapasowa obszaru RPL (DCT4)<br />
Zapis RPL<br />
Opis modułu Nokia Tool - część BB5/XGold2:<br />
Naprawa usterek programowych poprzez flashowanie<br />
Aktualizacja oprogramowania<br />
Zmiana pakietów językowych<br />
Naprawa IMEI (poprzez kalkulację ASK->RPL)<br />
Flashowanie telefonów BB5 możliwe przez interfejs FBUS bądź USB (ostatnia implementacja protokołu FUR<br />
praktycznie nie odbiega możliwościami od FBUSa)<br />
Pełna kopia zapasowa RPLa z telefonów BB5 - jako jedyne urządzenie na świecie potrafi zgrać pelnego RPLa wraz z<br />
Superdonglem z telefonów RAPIDO oraz RAPU z nowym rodzajem szyfrowania. Telefon po zrobieniu kopii zapasowej<br />
może zostać bez problemu zaniżony, wyczyszczony, itd... Dodatkowo po przywróceniu RPL telefon wciąż będzie się<br />
autoryzować z oryginalną kartą SX4 Nokii.<br />
Naprawa downgrade (niektóre modele ; BB5)
Autoryzacja SX-4 poprzez serwer (w celu naprawy ST_SECURITY_TEST failed)<br />
Autoryzacja SX-4 bez użycia Internetu - box emuluje oryginalną kartę SX4 Nokii oraz jako jedyny w momencie<br />
autoryzacji nie uszkadza kluczy Superdongle<br />
Naprawa kluczy superdongle (np. po pełnym wykasowaniu telefonu)<br />
Odczyt certyfikatów (NPC,CCC,HWC,...)<br />
Zapis certyfikatów<br />
Analiza bezpieczeństwa telefonu (w celu ustalenia przyczyny Contact Service)<br />
Zapis RPL<br />
Pełne odblokowanie telefonów opartych o SL1/SL2 (łącznie z najnowszych modeli opartych o hash 479cc....) poprzez<br />
kalkulacje kodów odblokowywujących. W celu wyliczenia kodów potrzebny jest jednak odczyt obszaru bezpieczeństwa<br />
- poprzez interfejs FBUS.<br />
Pełne odblokowanie telefonów opartych o SL1/SL2 poprzez interfejs USB (Modele oparte o procesor RAPIDO, np. E51,<br />
6120c, 6220c,).<br />
Odblokowanie / relock telefonów opartych o SL1/SL2 poprzez kalkulację RPL - poprzez FBUS, lub USB (RAPIDO).<br />
Naprawa uszkodzonego obszaru simlocka w telefonach SL1/SL2 - porzez FBUS, lub USB (RAPIDO).<br />
Ręczne wprowadzanie kodu odblokowywującego poprzez interfejs FBUS/USB<br />
Odczyt kodu zabezpieczającego<br />
Reset kodu zabezpieczającego<br />
Odblokowanie najnowszych telefonów SL3 poprzez LBF. Logger działa praktycznie na wszsytkich procesorach<br />
(RAP3,RAPIDO,RAPU,RAP4) poprzez interfejs FBUS. W ostatniej aktualizacji dołożyliśmy możliwosc odczytu danych do<br />
LBF poprzez interfejs USB! (Obsługiwane RAPIDO oraz RAPU, RAP4/RAP3 w kolejnych aktualizacjach).<br />
<strong>Box</strong> przed odczytem LBF rozpoznaje profile bits. Jeśli telefon pochodzi z sieci takiej jak Telcel Mexico oraz posiada<br />
zablokowaną możliwość wprowadzenia kodów przez kabel lub klawiaturę użytkownik otrzyma stosowny komunikat<br />
<strong>Box</strong> przed odczytem LBF sprawdza czy telefon posiada 15 cyfrowy kod (możliwy LBF) czy 20 cyfrowy (LBF nie możliwy<br />
w związku ze zbyt dużą złożonością czasową - 10^20)<br />
Do odblokowania/odczytu LBF obsługiwane są wszystkie hashe, czyli:<br />
68597B9162BAB81AF74C56E78EA2588F<br />
EA81B32860B86EF4231A11831045F3E6<br />
8E309B54DA1ADDE27C2A035D63AACACD<br />
916F75217F32081248B15C38DFC8E81B<br />
DA550B5BAAB517409088A3E4F3EB53AC<br />
B8C3ADECFC997FCD8081D3DEAF870B8C<br />
479C6DDE3942E12C429C1D6ADED80371<br />
C70CB07324056BC66A824347F40DB2D5<br />
B1A9CEADB5CE9CF9FB4F442150AA8E09<br />
46802B476C93A05CBAF76A64752086A9<br />
1B0D74C532CA1C6133940C740E8C786E<br />
25B977A055BE9B5DEC0C38A2A279C695<br />
700370BCF8AFBAB25DD62DBD124FD9CE<br />
9DDBFCFE6E73CED7D8C6268C8EB85723<br />
7B045400E1752022F9EB80B0DEA9C65D<br />
928E5FFB88D81E5F74729A212AB9D12E<br />
F2D76DFAFD66C7F195F278417DF05888<br />
CAEEBB65D3C48E6DC73B49DC5063A2EE<br />
FCB5C510AF7F09F313D9BDE85A707CC0<br />
9A28E119033B91D14D22838C86D0D53C<br />
F682624FFB08F6D955DBE7D9C0485084<br />
55DF9CBCC80B17225043DDA1CC783C97<br />
38F312750F686F9FC9B1B3778774A195<br />
BAF3A9C3DBFA8454937DB77F2B8852B1<br />
A5404AE83A594ECADEE532F0C236BFA6<br />
E9EFF4BFAA5393217CA6B17755FC3E14<br />
Opis narzędzia COM Emulator:<br />
Urządzenie może pracować w trybie emulatora COM. Po emulacji box będzie widniał w systemie jako Port COM.<br />
Bardzo przydatna funkcja - możemy podpiąć jakikolwiek kabel serwisowy zgodny z pinoutem UFSa pod port Service.<br />
Korzystająć z darmowych/płatnych programów możemy w ten sposób również serwisować inne telefony (np. Siemens,<br />
LG, Sony Ericsson, Samsung, ...)<br />
Opis dodatku <strong>Cyclone</strong> Calculator:<br />
Odblokowanie poprzez kalkulację kodów NCK następujących modeli:<br />
B331<br />
BlueBelt<br />
C700<br />
C701<br />
C707<br />
C717<br />
C820
C825<br />
E101FLIP<br />
EL03<br />
I650<br />
MANDARINA DUCK<br />
MISS SIXTY<br />
OT103<br />
OT203<br />
OT203A<br />
OT203E<br />
OT280<br />
OT303<br />
OT360<br />
OT363<br />
OT383<br />
OT600<br />
OT660<br />
OT708<br />
OT800<br />
PLAYBOY<br />
S215<br />
S218<br />
S319<br />
S320<br />
S321<br />
S520<br />
S621<br />
S853<br />
V570<br />
V670<br />
V770<br />
VM621I<br />
Opis narzędzia <strong>Cyclone</strong> LOG2COD:<br />
Unikalne oprogramowanie służące do przeliczania zgranych plików LOG (LBF) do COD. Wymagana karta graficzna<br />
zgodna z ATI CAL (HD5xxx,HD6xxx)<br />
Obsługiwane modele przez <strong>Cyclone</strong> <strong>Reloaded</strong> <strong>Box</strong>:<br />
Rap3Gv3 phones: (SL1)<br />
3109c (RM-274)<br />
3110c (RM-237)<br />
3250 (RM-38)<br />
3500c (RM-272)<br />
3500cb (RM-273)<br />
5200 (RM-174)<br />
5200b (RM-181)<br />
5300 (RM-146)<br />
5300b (RM-147)<br />
5500 (RM-86)<br />
5700 (RM-230)<br />
5700 (RM-302)<br />
6085 (RM-198)<br />
6086 (RM-188)<br />
6086b (RM-260)<br />
6125 (RM-178)<br />
6126/6133 (RM-126)<br />
6131 (RM-115)<br />
6131 NFC (RM-216)<br />
6136 (RM-199)<br />
6151 (RM-200)<br />
6233 (RM-145)<br />
6234 (RM-123)<br />
6280/6288 (RM-78)<br />
6290 (RM-176)<br />
6300 (RM-217)<br />
6300b (RM-222)<br />
7370 (RM-70)<br />
7373 (RM-209)<br />
7390 (RM-140)<br />
8600 (RM-164)<br />
E50 (RM-170)
E50 (RM-171)<br />
E50 (RM-172)<br />
E61 (RM-89)<br />
E61i (RM-227)<br />
E62 (RM-88)<br />
E65 (RM-208)<br />
N73-1 (RM-133)<br />
N73-5 (RM-132)<br />
N75 (RM-128)<br />
N76 (RM-135)<br />
N76 (RM-149)<br />
N77 (RM-194)<br />
N80-1 (RM-92)<br />
N80-3 (RM-91)<br />
N92 (RM-100)<br />
BB5+ (SL2)<br />
3120C<br />
3555<br />
3555b<br />
5310<br />
5310b<br />
5610<br />
5610d<br />
6263<br />
6267<br />
6300i<br />
6301<br />
6500S<br />
6500C<br />
6555<br />
7500<br />
7900<br />
8800e Arte<br />
Rapido (SL2) - (BB5+ RAPIDO - możliwy unlock przez USB!)<br />
5320<br />
5800<br />
6110<br />
6120c<br />
6121c<br />
N705i<br />
N706i<br />
6124c<br />
6210<br />
6220c<br />
6290<br />
6600<br />
6650<br />
E51<br />
E63<br />
E66<br />
E71<br />
E75<br />
N78<br />
N79<br />
N81<br />
N81 8gb<br />
N82<br />
N85<br />
N95 8gb<br />
N96<br />
E75<br />
RAPS_V3.03-PA_SL2 CPU<br />
3600 slide<br />
5220 XpressMusic<br />
7210 Supernova<br />
7310 Supernova<br />
7610 Supernova<br />
7510a<br />
5130C<br />
RAP3GS_V3.02-PA_SL2 CPU<br />
36600 fold
6600 slide<br />
ASIC 3168<br />
RH-86 2610 v07.04a<br />
RH-87 2610b v07.04a<br />
RM-258 2760 v06.82<br />
RM-258 2760 v07.60<br />
RM-259 2760b v06.82<br />
RM-259 2760b v07.60<br />
RM-298 2630 v07.60<br />
RM-298 2630 v57.20<br />
RM-299 2630b v07.60<br />
RM-299 2630b v57.20<br />
RM-340 2600c v06.82<br />
RM-340 2600c v07.60<br />
RM-341 2600c-b v06.82<br />
RM-341 2600c-b v07.60<br />
RM-391 2760h v05.45<br />
RM-392 2680s v06.17<br />
RM-392 2680s v56.17<br />
RM-393 2680s-b v06.17<br />
RM-393 2680s-b v56.17<br />
RM-394 1680c v06.82<br />
RM-394 1680c v07.60<br />
RM-395 1680c-b v06.82<br />
RM-395 1680c-b v07.60<br />
RM-438 7100s v05.22<br />
RM-438 7100s v05.41<br />
RM-438 7100s v06.31<br />
RM-438 7100s v06.32<br />
RM-439 7100s-b v05.22<br />
RM-439 7100s-b v05.41<br />
RM-439 7100s-b v06.31<br />
RM-439 7100s-b v06.32<br />
RM-512 2330c v06.46<br />
RM-512 2330c v06.75<br />
RM-512 2330c v08.20<br />
RM-513 2330c-b v06.46<br />
RM-513 2330c-b v06.75<br />
RM-513 2330c-b v08.20<br />
RM-514 2320c v06.75<br />
RM-514 2320c v08.20<br />
RM-515 2320c-b v06.75<br />
RM-515 2320c-b v08.20<br />
RM-519 2720f v08.20<br />
RM-520 2720f-b v08.20<br />
RM-543 2323c v06.75<br />
RM-543 2323c v08.20<br />
RM-544 2323c-b v06.75<br />
RM-544 2323c-b v08.20<br />
Modele SL3 - unlock poprzez LBF (log2cod - bruteforce). Możliwość odczytu danych zarówno po interfejsie<br />
FBUS jak i USB!<br />
2690 - RM-635<br />
2700c, 2700c-2 - RM-561<br />
2730c-1, 2730c - RM-578<br />
2730c-1b - RM-579<br />
3600s - RM-352<br />
3720c - RM-518<br />
3720c-2 - RM-518<br />
5130, 5130c-2 - RM-495<br />
5130c-2 - RM-496<br />
5228, 5230, 5232, 5233 - RM-588/593/594/625/629<br />
5310 Xpress Music - RM-303<br />
5530 - RM-504<br />
5630 Xpress Music - RM-431<br />
5630d-1 - RM-431<br />
5730s-1 Xpress Music - RM-465<br />
5800d - RM-356/428<br />
6120c - RM-243<br />
6300 - RM-217<br />
6303c - RM-443<br />
6500c - RM-265<br />
6500s-1 - RM-240<br />
6700c-1, 6700c - RM-470
6700s - RM-576<br />
6710s navigator - RM-491<br />
6720c - RM-424<br />
6730c-1 - RM-547<br />
6750 Mural - RM-381<br />
6760s - RM-573<br />
6790s - RM-492/599<br />
7210c, 7212c - RM-436<br />
C3-01 - RM-640<br />
C5-00 - RM-645<br />
C5-03 - RM-697<br />
C6-00 - RM-612/624<br />
C6-01 - RM-601/718<br />
C7-00 - RM-675<br />
E5-00 - RM-632<br />
E52-1 - RM-469<br />
E55-1 - RM-482<br />
E63 - RM-437/450<br />
E66 - RM-343/345/420/494<br />
E71 - RM-346/347/357/407/493<br />
E72-1 - RM-530<br />
E72-2 - RM-529<br />
E73 - RM-658<br />
N8-00 - RM-596<br />
N86 - RM-484/485/486<br />
N97 - RM-505/506/507<br />
N97-4 mini - RM-555<br />
N97-5 - RM-553<br />
X3-02 - RM-639<br />
X5-01 - RM-627<br />
X6-00 - RM-551/559<br />
X7 RM-707<br />
Nokia 500<br />
Nokia 600<br />
Nokia 700<br />
Nokia 701<br />
ASHA 200 RM-761<br />
ASHA 200 RM-762<br />
C1-01 RM-607<br />
C1-01 RM-608<br />
C1-02 RM-643<br />
C1-02 RM-644<br />
C2-00 RM-704<br />
C2-02 RM-692<br />
C2-02 RM-693<br />
C2-05 RM-724<br />
C2-05 RM-725<br />
C2-03 RM-702<br />
C2-06 RM-702<br />
C2-07 RM-692<br />
C2-08 RM-702<br />
X2-02 RM-694<br />
X2-05 RM-772<br />
X1-00<br />
X1-01<br />
Nokia 100<br />
Nokia 101<br />
Nokia 102<br />
Wygląd <strong>Box</strong>a <strong>Cyclone</strong> <strong>Reloaded</strong> (obudowa biała lub czarna) i programu:<br />
Video z działania programu <strong>Cyclone</strong> <strong>Box</strong>:<br />
Lista wszystkich aktualizacji do 9.11.2012 włącznie:<br />
=====================<br />
Installer v1.22<br />
09.11.2012<br />
=====================<br />
- New CPU support added, XGold223 (Asha 308, Asha309)<br />
- <strong>Support</strong>ed operations: Write Flash, Read/Write Certificates, Read RPL, Write RPL, etc...
- Firmware v02.11 Released<br />
- Lumia SmartTP(R) introduced, for testers only (can detect short-circuits between Lumia eMMC Points (MISO,MOSI,CLK,CS),<br />
GND, or VCC, it shows also link quality). Use on _POWERED OFF_ PCB! When connecting power, it can show FALSE status!<br />
Very helpful during soldering time.<br />
- New BB5 Loaders Added<br />
- Lumia USB Flashing improved<br />
- Latest Blackberry MEPs added<br />
- Improved flashing speed and NPC certs reading time<br />
- Improved CBUS protocol handling (sometimes it wents out of synchronization)<br />
- Fixed BSI spurious glitch problem with ~2.x firmware<br />
- Fixed DCT4 booting problems<br />
- Improved FBUS Local Mode entry<br />
- XGold213xx certificates Backup Added (NPC,HWC,CCC,...)<br />
- XGold213xx Full Flash chip dump to BIN added<br />
- XGold213xx Low-level PMM dump added (can dump PM from dead mobile)<br />
- XGold213xx Low-Level FILESYSTEM dump from dead mobiles added. This dumps full FAT16 user data partition to BIN file<br />
for further actions (analysis, recovery, forensics, ...)<br />
- Minor changes and bugfixes<br />
Notes about XGold 223 flashing: Switching to RAW mode is not supported (i.e. flashing from local/test mode, ROM will<br />
respons with empty public id (000000...) - very same story as with rapido). Battery reset needed, software will prompt you,<br />
but not always. Keep it noticed.<br />
Notes about XGold 223 RPL: Readen RPL is not full RPL backup (missing crypted PM308 data). This phone is very<br />
TexasInstruments-Nokia like, but not really. Once loaders with assymetric key hack is not ready, you SHOULDN'T full erase<br />
your phone any way.<br />
=====================<br />
Installer v1.21<br />
25.06.2012<br />
=====================<br />
- New BB5 FBUs/USB Loaders v12.08.00 Added<br />
- Qualcomm Based Products support added (Lumia 800, 610, etc)<br />
- Normal mode Flashing is supported<br />
- Dead-mode flashing is supported<br />
- Downgrade is supported<br />
- <strong>Support</strong> for Multi-CNT Qulacomm Configurations<br />
- <strong>Support</strong> secure-erase USER Area - this takes about 15-25 minutes<br />
- Basic read info including battery information etc for Lumia products<br />
- Automatic Variant selection for Lumia products<br />
- Cross-flash is supported, if Public Key hash matches<br />
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\<strong>Cyclone</strong><br />
<strong>Box</strong>\Drivers\ZuneDrivers<br />
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program<br />
Files\<strong>Cyclone</strong> <strong>Box</strong>\Drivers\LumiaFlashing<br />
- Abort Button improved<br />
- SX4 Default Database updated, added 30 new models<br />
- Nokia Connectivity cables drivers updated to v7.1.78.0<br />
- Minor changes and bugfixes<br />
=====================<br />
Installer v1.20<br />
30.04.2012<br />
=====================<br />
- New Loaders v11.50.00 added<br />
- MEP-40488-004 added<br />
- Xgold113 (Dual-sim) RPL write support added<br />
- New Product - <strong>Cyclone</strong> <strong>Box</strong> <strong>Reloaded</strong> support added<br />
- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this,<br />
lots of stability and speed improvment gained.<br />
- "News" added in main window<br />
- No need anymore to tick "Old USB flashing method" manually, it's detected automatically<br />
- "New Downgrade" BB5 method added (tick in before-flash tasks)<br />
- When Windows 7 is detected, software is not hidden to tray<br />
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of<br />
current job: green progressbar - working, red progressbar - error, yellow-paused, etc<br />
- Boot recovery added for all boxes during box wizard<br />
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)<br />
- Automatic smartcard refill when empty addded<br />
- Added COD->NCK verification upon data generation<br />
- After COD->NCK calculation, NCK codes are automatically stored inside COD file<br />
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)<br />
- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)<br />
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured
about our software quality and security - no hidden trojans (as happened before with other products).<br />
- <strong>Box</strong> wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill,<br />
bootloader upgrade, etc your box. Just one click.<br />
- <strong>Box</strong> Registration module removed<br />
- <strong>Box</strong> Maintenance module removed<br />
- Card Maintenance module removed<br />
- The paths is now updated on each sw startup<br />
- Fixed Windows7 Save Paths/Settings problem<br />
- BB5 loader problems when skin enbled (ROM refused...etc)<br />
- Access violation on exit fixed<br />
- Splash updated<br />
- CBUS Lost Handle Fixed<br />
- Only one copy of <strong>Cyclone</strong> <strong>Box</strong> application can be launched now, this improves stability<br />
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)<br />
- Fixed tray issues<br />
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version<br />
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did containt<br />
Superdongle/Simlock data only)<br />
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much<br />
confussion<br />
- "Join us on Facebook" added at main software<br />
- "cyclonebox.dll not found" message when no drivers installed changed to suitable messagebox asking to connect your box<br />
first time and install drivers<br />
- "security problem #1" solved on those who copied cyclonebox.dll before<br />
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)<br />
- FastMM v4.99 Introduced<br />
- Skin Stack Updated to v7.62<br />
- libeay/ssleay libraries updated to latest one, much more fast and stable<br />
- Minor changes and bugfixes<br />
=====================<br />
Installer v1.17<br />
20.12.2011<br />
=====================<br />
- BB5 FBUS/USB Loaders v11.40.00 Introduced<br />
- Realtime SE Xperia Unlocker account Creator in 'Credits' tool added. 10 <strong>Cyclone</strong> credits = 1 Xperia phone unlocked<br />
- SE Xperia Unlocked introduced into installer, this is 3rd party addon<br />
- Introduced previous updates (standalone and free Broadcom unlocking, RAPUv21, etc)<br />
- PM Protection is now unticked by default<br />
- PM Protection is automatically unticked during SX4 operations<br />
- Full Erase for New Protocol APE phones fixed (wrong CMT Flash Device Index selected)<br />
- Minor changes and Bugfixes<br />
=====================<br />
Installer v1.16b Hotfixed<br />
Black Edition<br />
22.09.2011<br />
=====================<br />
- New BB5 FBUS/USB Loaders v11.24.00 Introduced<br />
- Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem)<br />
- Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!),<br />
still "old method" avaiable in connection tab.<br />
- Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any<br />
attempt )<br />
- Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode<br />
problem in this models..), or "Old USB Flashing Method"<br />
- "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab<br />
- "Settings" tab renamed to Connection<br />
- TX2 settings removed from BB5 Flashing Tab<br />
- RAPU Flashing/Booting Improved<br />
- C2-02 XGold2 Flashing "Added" - <strong>Cyclone</strong> has flashing compatibilty for this model, but MassMemory file couldn't be handled<br />
becasue too big. Fixed.<br />
- BB5 Mass Memory Flashing Tested - <strong>Cyclone</strong> SW has this posibility from long time ago...<br />
- Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...)<br />
when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still<br />
FBUS operations fails.<br />
- Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally<br />
- Fixed invalid Calculation of Mastercode<br />
- Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11<br />
- Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS<br />
- Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)<br />
- Alcatel Calculator added to gui<br />
- PMM Protection Checkbox added upon PM write. Use to protect PM security fields.<br />
- Diagnostic Module Added<br />
- Selftests moved to new "Diagnostic" module
- Vibra Tests Added<br />
- Backlight Tests Added<br />
- "Autodetect" added for DCT4 Unlocking. Unique method - non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable<br />
on all boxes right now). If there is problems with autodetection - user still can select unlocking method manually.<br />
- Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab<br />
- Fixed product mismatch on XG1/XG2 autodetection<br />
- Removed DCT4 ASK-RPL From Credits Manager<br />
- Removed SuperDCT4 Activation from Credits Manager<br />
- StatusBar messages are more accurate now<br />
- Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and<br />
programm it - one-click REPAIR ??????????????4.<br />
- CacheV2 Introduced<br />
- XGold1/2 Flashing Routines rewritten to be more memory effective<br />
- Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2<br />
- USB Connection Type is now selected automatically when XGold2 platform found<br />
- Check flashing Bus for WD2 fixed<br />
- Read UEM Imei for WD2 Fixed<br />
- Read ASK for WD2 Fixed<br />
- Write RPL for WD2 Fixed<br />
- Fixed lots of Access Violatios after closing up Nokia Tool<br />
- Fixed bug with disappearing Tray icon after Minimize to Tray<br />
- Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore<br />
- Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file<br />
- The supported MEP List are now acquired from box once Blackberry Tool launch<br />
- Moved UEM stuff to new "ASK/RPL Tool"<br />
- XGold2 MassMemory flashing added<br />
- Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes<br />
Service, etc)<br />
- Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for<br />
Blackerry,XGold1,...)<br />
- XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining<br />
Calculation Limit is displayed<br />
- Relock files updated for DCT4<br />
- AutoUpdater Introduced<br />
- USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)<br />
- 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists - select all<br />
flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M - autoselection is HWID based<br />
and may fails anytime).<br />
- Database Unlock Introduced<br />
- RPL Write revised<br />
- Fixed bug with Broadcom Read Info<br />
- PARTNERC certificate support added for Certificate Read<br />
- PARTNERC certificate support added for Certificate Write<br />
- PARTNERC certificate support addef for RPL Operations<br />
- OMAP Loaders Fixed<br />
- PM Write bugs fixed (Access Violation)<br />
- Bruteforce between NCK Fixed<br />
- Erase files support added<br />
- DCC configuration for NIMMIIIIRRFF06150000 added<br />
- DCC configuration for NIMMIIIIRRFF095A1F05 added<br />
- DCC configuration for NIMMIIIIRRFF095A1F04 added<br />
- DCC configuration for NI00IIIIRR0306150018 added<br />
- DCC configuration for NIMMIIIIRRFF095B1F05 added<br />
- DCC configuration for NIMMIIIIRRFF0102F201 added<br />
- DCC configuration for ISL2TI0200000103B840 added<br />
- DCC configuration for 8600030001040A021001 added<br />
- DCC configuration for 860003000104094B2F01 added<br />
- DCC configuration for 86000300010401035424 added<br />
- DCC configuration for NI00BC000003095B1F00 added<br />
- DCC configuration for NI00BC0000030102F203 added<br />
- DCC configuration for NI00BC0000030102F202 added<br />
- DCC configuration for NI00BC000003095B1F05 added<br />
- DCC configuration for NI00BC000003095B1F01 added<br />
- DCC configuration for NI00IIIIRR030C213402 added<br />
- DCC configuration for NI00IIIIRR030C213401 added<br />
- DCC configuration for NI00IIIIRR030C20C605 added<br />
- DCC configuration for NI00IIIIRR03094B2F01 added<br />
- DCC configuration for NI00IIIIRR0301022E05 added<br />
- DCC configuration for NI00IIIIRR0301022E01 added<br />
- DCC configuration for NIMMIIIIRRFF0C206C02 added<br />
- DCC configuration for NI00IIIIRR0301035602 added<br />
- DCC configuration for NI00CS0000040C213402 added<br />
- DCC configuration for NI00CS00000401022E05 added<br />
- DCC configuration for NI00BC0000040F03F802 added<br />
- DCC configuration for NI00BC0000040A4E2000 added
- DCC configuration for NI00BC000004095B1F01 added<br />
- DCC configuration for NI00BC000004095B1F00 added<br />
- DCC configuration for NI00BC0000040103B904 added<br />
- DCC configuration for NI00BC0000040102F201 added<br />
- DCC configuration for NI00BC00000401022C00 added<br />
- DCC configuration for 0A4E2007 added<br />
- DCC configuration for 0103B904 added<br />
- SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638,<br />
RM-707, RM-712<br />
- HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645<br />
- Models.ini refreshed<br />
- Skin Stack Updated<br />
- Previous updates included<br />
- Nokia Connectivity Cable Drivers updated to v7.1.42.0<br />
- Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0<br />
- <strong>Box</strong> Firmware v01.73 Released<br />
- Hotfixes:<br />
- Create RPL function fixed<br />
- Filter Group Erase Data fixed<br />
- Failed to read WMDRM PD Data fixed<br />
- Minor changes and bugfixes<br />
=====================<br />
Installer v1.15<br />
18.06.2011<br />
=====================<br />
- Added READING DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone (previously shown as Crypted DCT4+) -<br />
of course WITHOUT data loss - seems 1st in the world<br />
- Added RESET (to 12345) DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone - of course WITHOUT data loss<br />
- seems 1st in the world<br />
- Added Reading Full RPL (NPC,CCC,HWC,SIMLOCK,SD,...) from Dead/Downgraded/Security Wrong BB5 Units - seems 1st in<br />
world. If phone doesn't power on (Stuck on Nokia logo, or completly dead), you can now dump full RPL file in order to Full<br />
Erase your phone and revive it. Softwar before dumping RPL in Recovery mode, will ask user of doing so. So in any case of<br />
reviving downgraded phone is:<br />
1. Create RPL from Dead Phone<br />
2. Full Erase<br />
3. Write any SW version<br />
4. Write previously backed-up RPL file<br />
5. Authorize with SuperDongle<br />
6. Write virgin PM<br />
- Added (fixed) NCK Counter Reset for XGold2 based phones<br />
- SecurityBlock is now backed-up before NCK Counters Reset, just in case<br />
- XGold1 Dead units booting fixed<br />
- Separate button for Receiving L7 Code for LBF added<br />
- Fixed DCT4 Security Counter Attempts Reset for some DCT4 variants<br />
- PMM Managment Tab added to BB5 Security Tab<br />
- Auto-Imei RESTORE added. Used if you have corrupted your imei, but having valid NPC file. Will scan StoredFiles for CRT<br />
file matching with CMT Public ID and automaticlly write it.<br />
- Added DCC camera Hardware Fault alert on DCC repair - some units is hardware fault and repair is not possible (DCC file<br />
not found)<br />
- XGold1 PMM parsing fixed (While reading LBF, Simlock table not found for some operators/phones)<br />
- XGold2 Flashing problems fixed (Invalid pointer)<br />
- USB transactions module rewritten<br />
- Full Erase button added for BB5 mobiles. No need to know FlashChip mapping and size - it's scanned automaticlly. It will<br />
erase CMT flash completly. Make sure RPL and PM is readed before erase!!!<br />
- Added "Just NPC" option used with "Erase Certificates". Used to delete only NPC certificate (corrupt IMEI and switch<br />
phone-on to make necessary job ... with IMEI corrupted phone will switch on even without valid security area). You can use<br />
this function to dump PM from non-working phone. Don't forget to CREATE RPL FROM PHONE first! Else you will get corrupted<br />
IMEI.<br />
- "Force Use Server" added for SX4 Authorization.<br />
- Fixed AutoSelecting bug<br />
- Fixed problem with parsing DCT4 variants when no DCT4 products installed<br />
- Fixed problem with parsing BB5 variants when no BB5 products installed<br />
- Index out of bound (0) fixed<br />
- Plain RPL is checked now by default<br />
- Removed "Bootloader upgrade problem" message, as caused too much confusion<br />
- Security Problem #1 and #2 Fixed (anti-idiot-fix)<br />
- Added additional Security Problem #5 message for Reinstall Drivers<br />
- Minor changes and bugfixes<br />
=====================<br />
Installer v1.14<br />
07.06.2011<br />
=====================<br />
- New BB5 FBUS/USB Loaders v11.16.0 Introduced
- Unique Data Reading for RAPIDO based phones by USB added<br />
- Unique Data Reading for RAPU based phones by USB added<br />
- SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable<br />
- SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones<br />
- Standalone Superdongle Auth - without SD key corruption<br />
- SD Keys Repair<br />
- Security Analyze<br />
- RPL Backup<br />
- All this using just usb cable...<br />
- Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world ;)<br />
- RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Apporiate messagebox will be<br />
displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject<br />
battery or do nothing - just click OK and it will switch to RAW mode directly.<br />
- We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like<br />
(completly erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release.<br />
You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT.<br />
* Known problems with RAPIDO 11.16.0 loaders:<br />
* FBUS support is broken<br />
* Readed Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data)<br />
* Probably not working with Axxxx ROMS (E51)<br />
* Lot of other issues observed<br />
- The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation<br />
- Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0)<br />
- <strong>Box</strong> Firmware v01.62 Released<br />
- Minor changes and bugfixes<br />
=====================<br />
Installer v1.13<br />
24.05.2011<br />
=====================<br />
- New BB5 FBUS/USB Loaders v11.14.0 introduced<br />
- Added 20 digits NCK recognization. Software will now give alert upon reading LBF data, when 20 digits NCK data will be<br />
found. This saves server time!<br />
- The Profile Bits are also analyzed now during Reading LBF Data. If phone is i.e. from Telcel Mexico - LBF data will not be<br />
readen (because it will not accepted calculated NCK code). This saves server time!<br />
- BB5/XGold LBF is creating now additional "BCL" format file<br />
- BB5/XGold LBF is creating now additional "SHA" format file<br />
- BB5/XGold LBF is creating now additional oclHashCat ATI based 64-bit BAT File<br />
- BB5/XGold LBF is creating now additional oclHashCat ATI based 32-bit BAT File<br />
- BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 64-bit BAT File<br />
- BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 32-bit BAT File<br />
- SIMLOC30 RPL Write Fixed (C7-00,C2-01,...)<br />
- The generated "BAT" file could be used by oclHashCat-lite. It's 3rd party software, avaiable here:<br />
http://hashcat.net/files/oclHashcat-lite-0.05.7z . Unpack it somewhere, and place in same dir readen "BAT" files. oclHashCat<br />
is 15% faster (can reach 6Billions hashes/sec on 2xhd5970) than log2cod, plus it supports latest ATI GPUS<br />
(HD6970,HD6990,HD6xxx). It supports calculation resume, etc.<br />
- You don't need now log2cod to generate LBF Data. Just use generated BAT file for fast oclHashCat calculation. Generated<br />
COD file you can send directly to our server via "Send COD File to server" button to receive valid Level 7 code.<br />
- Added oclHashCat COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and<br />
calculate Level 7 code)<br />
- Added MxCrap COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and<br />
calculate Level 7 code)<br />
- Added warning message when TX2 transmission error occurs during 2ND Loader Initialization<br />
- Upgraded RAPIDO Custom loader to v1.05. Fixed Reading Unique Data issues on old Public Rom (A8C1D671) based phones<br />
(N95,N78,...).<br />
- BlackBerry MEP-4 calculation added<br />
- Merged previous updates (RAPIDO/RAPU/RAP4 all latest hashes support for reading LBF data, etc...)<br />
- Fixed Security Code Reset Issues on DCT4/BB5 Platform<br />
- Firmware v1.61 Released<br />
- Minor changes and bugfixes<br />
=====================<br />
Installer v1.12<br />
09.03.2011<br />
=====================<br />
- Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed<br />
- Added SP unlock via server / log2cod reading<br />
- Added standalone SX4 auth<br />
- Added standalone Superdongle Keys Repair<br />
- <strong>Support</strong>ed phones:<br />
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72<br />
- RAP4 Based: 3710, 5330, 7230, 6303i, X3<br />
- Minor changes and bugfixes<br />
=====================
Installer v1.11<br />
07.03.2011<br />
=====================<br />
- New BB5 FBUS/USB Loaders v10.48.1 introduced<br />
- DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done automaticcly.<br />
During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.<br />
- XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)<br />
- Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) - FIRST in the world. The backup is created automatically<br />
during flash.<br />
- Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file, you need flash<br />
your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).<br />
- XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change<br />
- Added XGold1 Unlocking by Reading LOG2COD Log file<br />
- Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world<br />
- Added XGold1 Low-Level RPL Backup, seems 1st in world<br />
- XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL<br />
Contains IMEI and Simlock Block), seems 1st in world...<br />
- Both XGold1 Low Level dumps support dead phones (phone might be dead, <strong>Cyclone</strong> will binary dump PM from flash chip<br />
directly)<br />
- Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they<br />
are ASCII marked as deleted ones). <strong>Support</strong> deleted messages, contacts, ..., seems 1st in world<br />
- Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world<br />
- Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world<br />
- XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...<br />
- Added "Mapped At" FlashChip information during XGold Flashing, when possible<br />
- Added "Sector Size" FlashChip information during XGold Flashing, when possible<br />
- No reboot flashing for XGold added<br />
- APE block flashing fixed for various RAPIDO mobiles<br />
- Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)<br />
- Fixed Blackberry Module - upon reading MEP via USB it was placing it on wrong window<br />
- Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side<br />
- Fixed OpenDialog filter when adding DCT4/BB5 flash file<br />
- log2cod: v1.1 Released<br />
- log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)<br />
- log2cod: Added Ivan Golubev EULA<br />
- log2cod: Added Queue managment<br />
- log2cod: Code Verification added after successfull calculation<br />
- log2cod: Console is cleared after some salts processed in order to avoid overflow<br />
- log2cod: PeekNamedPipe() problem fixed<br />
- log2cod: Added queue processing in loop mode (you can add new jobs during calculation)<br />
- The transaction bar have been a bit resized<br />
- <strong>Cyclone</strong> <strong>Box</strong> HW Rev B11x, C11x added<br />
- Models.ini updated<br />
- <strong>Box</strong> USB Drivers updated to v1.0.0.6 - they are digitally signed now, no more problems on Win7 / Win Vista x64<br />
- COM Emulation Service Driver updated to v1.0.0.1 - it is digitally signed now, no more problems on Win7 / Win Vista x64<br />
- Main Software is now Digitally Signed (Authenthicode)<br />
- log2cod is now Digitally Signed (Auhtenthicode)<br />
- <strong>Cyclone</strong> Calculator is now Digitally Signed (Authenthicode)<br />
- Installer is now Digitally Signed (Auhtnethicode)<br />
- New phones added to Virgin SX4 Database<br />
- New phones added to Security Database (Virgin RPL)<br />
- <strong>Box</strong> Firmware v1.53 Released<br />
- Some minor and major changes and bugfixes<br />
- Versions snap<br />
Installer v1.11<br />
Main x86 Application v1.0.0.11003<br />
x86 Memory Manager v4.76.0.179<br />
Native USB Drivers v1.0.0.6<br />
USB-COM Stack Drivers v1.0.0.1<br />
Onboard Secure Bootloader v2.13<br />
Onboard Main Nokia Application v1.53<br />
Onboard COM Emulation Code v1.00<br />
Onboard Security Card Revision v1.10<br />
Nokia Connectivity Cable Drivers 7.1.34.0<br />
BB5 USB/FPIF Single Line/FPIF DualLine v20110301<br />
DCT4 FPIF Single Line/USB v20100410<br />
DCT4 Unlock Patches DEPRECATED<br />
Communication Stack SSLv3-keys-06092008<br />
Skin Stack v7.21<br />
=====================<br />
Installer v1.10<br />
Merry X-Mas !<br />
05.12.2010
=====================<br />
- First in the world - Infineon XGold IMEI Backup/Restore added<br />
- New BB5 FBUS/USB Loaders v10.34.1 introduced<br />
- BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB - using FBUS loaders on USB. Is possible now to<br />
do also RPL write, Cert's read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!<br />
- FBUS2USB RAPU <strong>Support</strong><br />
- FBUS2USB RAP4 <strong>Support</strong><br />
- FBUS2USB Broadcomm <strong>Support</strong><br />
- Broadcomm platform flashing added (Nokia X2,....)<br />
- 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)<br />
- SL3 Simlock RPL Write Introduced<br />
- DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit<br />
- The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking - i.e. Telcel<br />
Mexico units)<br />
- New NCK unlocking method for SL2 phones introduced (with latest MCU SW versions)<br />
- Added Autologging (operation logs are stored in StoredFiles)<br />
- Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)<br />
- Added StatusBar in Nokia Tool, displaying current Task/Mobile attached<br />
- DCC Camera Repair added for module NI00BC0000030102F201<br />
- DCC Camera Repair added for module ISL3TI0200000C000002<br />
- DCC Camera Repair added for module IS00TI0200000C208A03<br />
- DCC Camera Repair added for module IS00TI02000001022B04<br />
- DCC Camera Repair added for module 86000300010401022B04<br />
- DCC Camera Repair added for module 8600030001040C208A03<br />
- DCC Camera Repair added for module 86L10300010406260004<br />
- DCC Camera Repair added for module 86L10300010406260000<br />
- DCC Camera Repair added for module 86L103000104094C1003<br />
- Refactorized GUI thread problems<br />
- Improved stability of Blackberry calculator<br />
- Improved flashing speed with Skins Enabled<br />
- Added detailed Action Statusbar<br />
- Added CBUS StatusBar, indicates "---->" on USB Transmit, " 100.<br />
- <strong>Support</strong>ed are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:<br />
9A28E119033B91D14D22838C86D0D53C<br />
9DDBFCFE6E73CED7D8C6268C8EB85723<br />
38F312750F686F9FC9B1B3778774A195<br />
BAF3A9C3DBFA8454937DB77F2B8852B1<br />
CAEEBB65D3C48E6DC73B49DC5063A2EE<br />
F2D76DFAFD66C7F195F278417DF05888<br />
F682624FFB08F6D955DBE7D9C0485084<br />
FCB5C510AF7F09F313D9BDE85A707CC0<br />
- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply<br />
click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2<br />
phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or<br />
new 5800 >v.30, new N96, etc)<br />
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a<br />
generic backup<br />
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated<br />
files<br />
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and<br />
your phone might be relocked<br />
- SL Area might be repaired using UNLOCK button for SL2 phones<br />
- RPL Write bugs fixed ("simlock not accepted" after few tries)<br />
- Path "/" problem fixed<br />
- Memory manager updated to v4.94<br />
- New skin manager introduced (6.53) - removed flash files selection bugs<br />
- GUI redesigned a bit<br />
- Nokia Connectivity Cable Driver updated to v7.1.22<br />
- 2760h RM-391 v06.83 Unlock / Relock added<br />
- 2330c RM-512 v09.55 Unlock / Relock added<br />
- 2330c-b RM-513 v09.55 Unlock / Relock added<br />
- 2720f RM-519 v08.42 Unlock / Relock added<br />
- 2720f-b RM-519 v08.42 Unlock / Relock added<br />
- 2720f RM-519 v09.55 Unlock / Relock added<br />
- 2720f-b RM-519 v09.55 Unlock / Relock added<br />
- SX4 Bypass during BB5 Unlock removed, is no needed anymore<br />
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field<br />
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually<br />
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed<br />
anymore)<br />
- 6220c,3600s booting fixed in new firmware<br />
- New Secure bootloader v02.10 introduced<br />
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware<br />
- Firmware RTOS Code Updated to v6.0.1<br />
- Slightly code optimizations and stability improvments in new firmware<br />
- Secure Bootloader upgrade introduced after box maintenance<br />
- Added support for <strong>Cyclone</strong> box HW REV A116, A117, A118, A119, A11A, A11B, A11C<br />
=====================<br />
Bulk Updates<br />
10.08.2009<br />
13.08.2009<br />
=====================<br />
- Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)<br />
- GUI Stability improved ; updated Skins Stack<br />
- Fixed Algoboot for BB5 phones in some configurations<br />
- SingleLine BB5 Flashing Speed improved (upgraded to 5.5mbits from 4mbits)<br />
- BB5 Multi-CRT Write bug fixed (mismatched certs when writing more than 1 certs at one time)<br />
- Improved Phone LOCAL/TEST Mode Entry algorithms during unlock and FBUS operatinos<br />
- Access Violation in some configurations, when changing BB5 Vpl / Dct4 Vpl Variant/Product - fixed<br />
- "Set factory defaults - BB5" are now default unticked after flash (useless in case of BB5 phones)<br />
- Repower on boot inverted ; accoring to firmware v1.0.5 , BB5 Phones are now default re-powered on boot<br />
- By default - USE DEFAULT PROFILE while unlocking DCT4Plus is unticked<br />
- DCT4Plus unlock routines rewritten - patch file is now applied before unlocking<br />
- Fixed problems upon unlocking some units of DCT4(plus) phones, when Initial SP Area is corrupted<br />
- When SIMLOCK IS NOT ACCEPTED during BB5 RPL Write, software trying to write FBUS part again after FLASHBUS part, so<br />
if NPC is corrupted, the SL will be restored anyway<br />
- Please don't use "Erase Security" function when writing BB5 PA_SL2 RPL, because SIMLOCK will not be accepted in such<br />
case! In order of simlock rebuild, NPC MUST BE CORRECT!<br />
- Improved BB5 RPL Write, when HWC can't be written (N96 - example), other certs being written and whole procedure is not<br />
being skipped<br />
- After sending Simlock and Superdongle data, delay added, so PA_SL can recalculate SP and Recreate 308 if needed<br />
(previously it wasn't working all times)<br />
- During BB5 Configuration Parse (flash chips, status), now RAM chip is displayed instead of UNKNOWN<br />
- DCT4Plus Security Status is now being displayed upon unlock - either TAMPERED or NOT TAMPERED<br />
- When DCT4Plus Security is NOT TAMPERED, <strong>Cyclone</strong> automatically makes Security Backup<br />
- DCT4 Loaders v7.9.49.0 added, support for new flash chips<br />
- BB5 Loaders v0.9.xxx added, support for new flash chips<br />
- New Nokia Loaders 0.9.xxxx have GREAT speed improvment in phones with slow Samsung flash chip - 0x00EC2208 (3500c,<br />
5200, 5310). Flashin of These phones without VPP usually taking approx 15-20 minutes, with this new loaders we have tested<br />
5200 and flashing speed was exactly 76 seconds (agains ~550).<br />
- DCT4 UEM Loaders Revised, added support for ASIC11 UEM IMEI Read<br />
- Path Manager added. Used to specify paths where original Nokia flashes are stored. By default it looks in Program<br />
Files/Nokia/Phoenix and Program Files/Common Files... User can specify many other paths (i.e. mapped network disk, or<br />
custom directory) where software will look for VPL files. Avaiable in Settings -> Paths.<br />
- BB5 Product/Variant VPL Parser added<br />
- DCT4 Product/Variant VPL Parser added<br />
- NCK Dumper for BB5 PA_SL2 added (RAP3G, RAPIDO), used to extract entered NCK codes in phone so it can be saved - in<br />
example during RPL SL Recreation, and then use for unlocking. The codes is being automaticlly dumped upon SP Data Read.<br />
- When user trying to unlock phone which have protected PM308 Security Block against modification, and there is message<br />
"Failed to write Security Block" software is now automaticlly writing back NPC backup - IMEI<br />
- IMEI 1234567890?, and "?" is not valid integer bug fixed<br />
- 1112 RH-93 v6.46 Unlock / Relock added<br />
- 2680 RM-393 v06.17 Unlock / Relock added<br />
- 2680b RM-393 v06.17 Unlock / Relock added<br />
- 5000d RM-362 v06.31 Unlock / Relock added<br />
- 5000d-b RM-363 v06.31 Unlock / Relock added<br />
- 2630 V57.20 unlock / relock partial was removed due to lack of signal<br />
- Erase Security while writing RPL is now by default disabled<br />
- SX4 Bypass during PA_SL2 unlock is now by default disabled<br />
- GUI Is now redesigned from scratch<br />
- <strong>Support</strong> for 1024x768 resolution - fixed problems<br />
- <strong>Cyclone</strong> <strong>Box</strong> HW Rev A113 support added<br />
- <strong>Cyclone</strong> <strong>Box</strong> HW Rev A114 support added<br />
- <strong>Cyclone</strong> <strong>Box</strong> HW Rev A115 support added<br />
- <strong>Cyclone</strong> Firmware v1.04 support added (DCT4 Booting improved)<br />
- <strong>Cyclone</strong> Firmware v1.05 support added (BB5 Booting improved)<br />
=====================<br />
Installer v1.02<br />
30.04.2009<br />
=====================<br />
- RAP3Gv2 PA_SL - SP Initialization added (unlock, SP Rebuild)<br />
- RAP3Gv3 PA_SL - SP Initialization added (unlock, SP Rebuild)<br />
- RAP3Gv3 PA_SL2 - SP Initialization added (unlock, SP Rebuild)<br />
- RAPIDO PA_SL - SP Initialization added (unlock, SP Rebuild)<br />
- RAPIDO PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- SX4 Bypass added after PA_SL2 Unlock, if needed<br />
- "Create RPL from phone" added. This is used to backup possible security data from phone in original NMP RPL format (plain<br />
one) this includes WMDRM Backup, All low-level certs (Nokia Public Certificate, Common Configuration Certificate, Hardware<br />
Certificate, VARIANT Cert), and Original SIMLOCK (only on PA_SL2 Phones !! ), which can be used to simlock restore /<br />
counter reset / PM 308 recreate - if needed - this data is sent directly to SIMLOCK SERVER directly so SL recreate is 100%<br />
"legal"<br />
- Added Codes Counter Reset for PA_SL2 phones. Used to reset Keyboard/FBUS Code Counter.<br />
- Added BB5 NCK Code FBUS Send (#pw+xxxxxxxxxxxxxxx+y), use especially when Keyboard counter is locked.<br />
- Added BB5 NCK COde KEYBOARD Send (#pw+xxxxxxxxxxxxxxx+y), use especially when FBUS counter is locked.<br />
- BB5 SL Export added. This exporting phone configuration key + simlock blocks to "SL5" file<br />
- BB5 SL Import added. Used to import previously exported "SL5" structure to phone upon BB5 SP Initialization.<br />
- BB5 PM -> Simlock RPL added, if PA_SL2 phone - use if simlock has been corrupted, and you have only PM backup. If PM<br />
have needed fields, it will create plain RPL file which can recreate simlock for you without headache.<br />
- SL5 Creator support for Creating Relocked SL5 for desired MCC+MNC / Profile Bits<br />
- Added "BB5_Autolock_IMSI.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to IMSI (one sim<br />
card).<br />
- Added "BB5_Autolock_MCCMNC.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to MCC-MNC<br />
(operator).<br />
- BB5 Plain RPL Write added.<br />
- Added "UB Backup" option while writing BB5 Plain RPL (SIMLOCK AREA), since they aren't adding SHA-1 before<br />
SIMLOCK_DATA in RPL file - it needs be skipped in case.<br />
- Added "Erase Security" option before RPL write. This is used when phone have problem with PM 308 blocks (downgrade, for<br />
example) and can't boot to accept superdongle / simlock data - in case, no need to full erase in case. Keep note that after<br />
RPL write YOU NEED SX4 Authorization with server and writing PM Fields 1 and 309. Otherwise your phone will fail to pass<br />
ST_SECURITY_TEST, and in effect will not boot.<br />
- Skin stack updated to v6.30, this is more stable and fast<br />
- Product code send added<br />
- HWID send added<br />
- PSN send added<br />
- DCT4 Nand MASS MEMORY Partitioning added before write. May be skipped ticking apporiative Skip MM Part button.<br />
- When no patch file found, SW will generate unlock codes for DCT4 unlock (asics 2,5,6,7)<br />
- Security Code Mastercode is now being generated upon read info<br />
- Added "Skip Patching" Option. Use for DCT4plus phones which are patched already, and all you need is to Initialize SP locks<br />
again (relock, etc)<br />
- DCT4 NCK Key / FBUS Count is now being readed correctly<br />
- DCT4 UEM OTP Imei Read added<br />
- DCT4 SP Locks are being parsed upon read<br />
- Added full support for Vista OS<br />
- Added support for 64bit CPUs - tested on X64 XP Professional, should work on NT6 too<br />
- BB5 Simlock backup before flash write no more asking user for directory, it's automaticlly saving to StoredFiles<br />
- BB5 Simlock backup automatically saving backup in RPL format if possible (PA_SL2 phone detected), otherwise it will save it<br />
in PM format<br />
- BB5 Booting routines totally refactorized<br />
- After DCT4 Page erase, the last-error-status is now queried from phone<br />
- Data checksum is now being checked again upon BB5 Flash Write<br />
- When NPC Certificate are being backed up during SX4 Bypass, it is now stored as "PUBLIC_ID.Sx4Bypass.NPC.CMT.CRT",<br />
not "DowngradeRepair" as before<br />
- When Writing BB5 Cert, it's now default pointing to StoredFiles<br />
- User is now being warned before "Erase all certificates" - BB5 (avoid mistakes)<br />
- For now, Erase All Certs erasing APE certificates too, if APE unit found<br />
- DCT4 Plus 2680 v6.82 unlock partial fixed<br />
- 2630 v57.20 Unlock added<br />
- 2630b v57.20 Unlock added<br />
- 2630b v06.82 Unlock added<br />
- 2760b v06.82 Unlock added<br />
- 2600c-b v06.82 Unlock added<br />
- 1680c v06.82 Unlock added<br />
- 1680c-b v06.82 Unlock added<br />
- 5000db v 05.27 Unlock added<br />
- 5000db v 05.45 Unlock added<br />
- Included old "new security" unlock partials for 2630, 1680, 5000, 2680 - v6.82<br />
- FastMM problem after exiting Main Application fixed<br />
- Some DCT4Plus unlock bugs fixed (like This is Invalid Integer...)<br />
- Added WD2 CBUS BT Phones support (bluetooth flashing problems)<br />
- Check Flashing Bus (BB5) now booting phone completly, not only fetching 1st Boot Data<br />
- Fixed problem when sometime wrong CMT / APE bootloader are being selected upon Certificate Operations<br />
- Increased FBUS Timeout to repair FBUS transactions problems on some environments<br />
- Netmonitor activation on DCT4/WD2 added<br />
- WD2 Format User Area added<br />
- "Initial SP corrupted" fixed on DCT4plus phones<br />
- After finished flashing the sound now being played;)<br />
- <strong>Cyclone</strong> HW Revision A112 support added<br />
- Progressbar issue fixed while BT Flash<br />
- SX4 Server Transaction fixed<br />
- Bigger delay added after SX4 Bypass in order to handle PM write correctly
- More debug messages is now being shown upon BB5 booting<br />
- Refactorized DCT4 ADSP Flashing routines<br />
- DCT4 / BB5 Factory defaults after flashing fixed in some cases<br />
- Minor changes and bugfixes<br />
- Improved BB5 Local/Test mode changes<br />
- <strong>Support</strong> : Fixed "Connection closed gracefully" in some cases<br />
- Fixed problems when invalid IMEI are being readed out from phone (in case of phone wasn't initialized and FBUS problems<br />
occured)<br />
- PM Write routines rewritten<br />
- Security card is now being resetted before phone flashing, this have effect on authenthication speed when flashing many<br />
phones one by one<br />
- Selftests routines improved (dynamic timeout)<br />
- Multiple files can be now choosen upon Writing Certificates saved as "CRT" (<strong>Cyclone</strong> binary format)<br />
- BB5 SP Locks now being parsed upon read out (blocks count, block content, etc)<br />
- DCT4Plus partials with version 6.82 have now removed from supported UPP list ASIC ID "3168" which is not unlockable (for<br />
now) with rom 0600 to avoid destroyed phones (no signal), in case you will got message "Not supported UPP ID", but your<br />
phone SL area will be untouched and after flash it will still work.<br />
- Blue screen of death fixed on some configurations<br />
- After PM Write, Statistics added, so user can easily see how many PM Record written OK / NOT OK<br />
- IMEI in "Credits" upon calculation is now checked for validity (last digit)<br />
- Updated Message before using DCT4 RPL Credits - ASIC 11 takes 2 credits and rest 1 credit<br />
- Main Nokia Firmware v1.03 avaiable, this changes:<br />
-- TX2 Output pin is now constant (Service Pin 3) due to many mistakes on user side.<br />
-- Flash write speed optimized, should be around 10% - 30% faster, especially on NAND-ONENAND phones. More<br />
optimizations to come.<br />
-- Erase status is now signalized by USB (red) led.<br />
-- Added support for WD2 CBUS BT Flashing<br />
-- BB5 Booting Improved on some environments<br />
-- RTOS Code Updated to 5.2.0<br />
-- Microcode USB Stack is now Vista compatible<br />
-- Removed blue screen of death problem on some XP configurations<br />
-- Minor bugs, fixes, and improvments<br />
- Versions snap<br />
Installer v1.02<br />
Main x86 Application v1.0.0.7396<br />
x86 Memory Manager v4.92R2<br />
Native USB Drivers v1.0.0.4<br />
USB-COM Stack Drivers v1.0.0.0<br />
Onboard Secure Bootloader v2.08<br />
Onboard Main Nokia Application v1.03<br />
Onboard Security Card Revision v1.09<br />
Nokia Connectivity Cable Drivers v7.1.8.0<br />
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)<br />
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)<br />
DCT4 Unlock Patches v20090502<br />
Communication Stack SSLv3-keys-06092008<br />
Skin Stack v6.30<br />
=====================<br />
Installer v1.01<br />
30.03.2009<br />
=====================<br />
- One click downgrade repair for BB5 added. Works on phones which after downgrade failing to boot (hang up on NOKIA<br />
screen) - this includes phones which dont had patched 308 before flashing or newer MCUs too. No need to full erase, etc. Just<br />
one click and 20 seconds, fast, and safe.<br />
- SX4 Bypass added. If phone can't be authorized due to corrupted superdongle key or server problems, you can use this to<br />
write protected PM Records (1, 309). No need to full erase, etc. Fast and safe.<br />
- DCT4 "SIMLOCK SERVER" Relock fixed (5000, 2630). Thx to wgmmmx for bugreport.<br />
- Check Flashing Bus for BB5 Added<br />
- Fixed registration process, when blank arguments are used<br />
- Fixed registration process, when invalid input data are used (i.e. special Russian chars)<br />
- Fixed invalid date/time problem while box maintenance (upgrade) on some timezones<br />
- Added in "Settings/General" option to skip box selftests (use when box selftest subsystem is damaged)<br />
- Resellers list during registration is now displayed in ascending order<br />
- Skin Stack updated to v6.21<br />
- Added DCT4plus new security unlock patches<br />
RH-116 7070p v6.82 - new security<br />
RM-258 2760 v6.82 - new security<br />
RM-298 2630 v6.82 - new security<br />
RM-340 2600c v6.82 - new security<br />
RM-362 5000d v5.27 - new security<br />
RM-362 5000d v5.45 - new security<br />
RM-392 2680s v6.82 - new security<br />
RM-394 1680c v6.82 - new security<br />
- USB Drivers updated to 1.0.0.3, this no more conflicting Micro<strong>Box</strong>
Powered by TCPDF (www.tcpdf.org)<br />
- Versions snap<br />
Installer v1.01<br />
Main x86 Application v1.0.0.6634<br />
x86 Memory Manager v4.92<br />
Native USB Drivers v1.0.0.3<br />
USB-COM Stack Drivers v1.0.0.0<br />
Onboard Secure Bootloader v2.08<br />
Onboard Main Nokia Application v1.00<br />
Onboard Security Card Revision v1.09<br />
Nokia Connectivity Cable Drivers v7.1.8.0<br />
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)<br />
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)<br />
DCT4 Unlock Patches v20090326<br />
Communication Stack SSLv3-keys-06092008<br />
Skin Stack v6.21<br />
=====================<br />
Installer v1.00<br />
20.03.2009<br />
=====================<br />
- Initial public release<br />
- Versions snap<br />
Installer v1.0<br />
Main x86 Application v1.0.0.6581<br />
x86 Memory Manager v4.92<br />
Native USB Drivers v1.0.0.2<br />
USB-COM Stack Drivers v1.0.0.0<br />
Onboard Secure Bootloader v2.08<br />
Onboard Main Nokia Application v1.00<br />
Onboard Security Card Revision v1.09<br />
Nokia Connectivity Cable Drivers v7.1.8.0<br />
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)<br />
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)<br />
DCT4 Unlock Patches v20090309<br />
Communication Stack SSLv3-keys-06092008<br />
Skin Stack v6.20<br />
Instrukcja rejestracji i uruchomienia oprogramowania na:<br />
http://forum.gsmhosting.com/vbb/showthread.php?t=705358<br />
i na<br />
www.cyclonebox.com<br />
©2012 www.gsm-support.pl<br />
Opis ten nie stanowi oferty w rozumieniu Kodeksu Cywilnego. <strong>GSM</strong>-<strong>Support</strong> zastrzega sobie prawo do możliwych błędów w<br />
opisie produktu.<br />
Prosimy o weryfikację z Państwa strony, a w razie wątpliwości o kontakt.<br />
<strong>GSM</strong>-<strong>Support</strong><br />
ul. Bitschana 2/38<br />
31-420 Kraków<br />
POLSKA<br />
tel. 608107455<br />
e-mail: sales@gsm-support.pl